HEROSE LIMITED

A MEMBER OF HEROSE GMBH
search
Contact Us

Contact Us Today

+44 1302 773114 +44 1302 773114

sales@herose.co.uk sales@herose.co.uk
Home About Us Quality Special Services Testimonials Faq Contact Us  

CATEGORIES

Accreditations

CE
PED Approval
ISO 9001 Approved
TPED Approval
UV
UV Approved
TUV CERT
TUV Certification
   Valve Type 06418

This type of valves is an :
  • Angle Pattern Cryogenic Safety Valve
  • c/w Lifting Lever                                                                                                       
  • Approved For Air Gases & Cryogenic Liquids                                                

                                                                                                                    		  View / print        
     
Cryogenic-Safety Valves, angle type, bronze, PN50, type tested TÜV-SV. 780. S/G

Full lift safety valve, orifice d0=23mm standard safety valve,
with carbon filled PTFE valve seal, closed bonnet, with lifting device
“cleaned and degreased for oxygen service”

Part No. 06418.X.0000                    
Inlet: male thread type G (BSPP) acc. to ISO 228/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06418.X.2000
Inlet: male thread type R (BSPT) acc. to ISO 7/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06418.X.5000
Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06418.X.6000
Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread NPT acc. to ANSI B 1.20.1

Available options -  on request only:

  • external parts nickel plated
  • with installed elbow at the outlet

Applications:
Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders.
Approved for air gases, vapours and cryogenic liquefied gases incl. LNG.
Working temperature: -196°C / -321°F (77K) up to +185°C / +365°F (458K)                                                                                    

  



Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII. The safety valve is marked with the lower capacity of both calculations.






For more information about cryogenic safety valve type 06418 please contact us .You can also print out these technical specifications by clicking on adobe icon available on the top right corner of this page.

Home | About Us | Quality | Products | Faq | Special Services | Contact Us | Links
Privacy Policy | Terms & Conditions | Sitemap

Site created and maintained by WSI